Height Adjustable Tilt Top Work Table
Results: 26
Alvin Reflex Table
The Alvin Reflex Table is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. This table has a wide, open base and telescoping legs with easy-grip height-adjustment knobs. The large Melamine top is angle-adjustable from zero to 45 degrees and features a PVC rim to prevent items from rolling or sliding off. A half-circle cut-out provides access for wheelchair users. This table folds flat for storage. DIMENSIONS: The top is 30 x 40 inches. The height adjust
Artist's Table.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable angle table can be built to any height. Instructions for wooden table. Top is an adjustable angle easel. Frame can be built to any height including wheelchair accessible. Includes drawing and dimensions for materials. SKILLS REQUIRED: Woodworking TITLE: Dream Table for an Artist REF: Article: Sunset Magazine, February 1990, pp 124B-125. PAGES (including cover):2 1990.
Babee-Tenda Safety Table
The Babee-Tenda Safety Table is a safety feeding and play table designed for use by young children with parents who use wheelchairs. Height-adjustable, this product can be used as a "short" high chair for feeding and taking care of a child. This product converts for a number of uses including infant seat/carrier, bather, changing table, high chair, booster chair, swing, playtable, chalkboard, easel, utility table. The feeding table is designed so that the baby is surrounded by the table and ca
Convert-Able Table
The Convert-Able Table is a height-adjustable tilt top work table designed for use by children and adults with mobility disabilities. This table features interchangeable snap-on table tops that allow it to be used for a variety of activities, such as reading and writing, art, and sensory stimulation. The height adjusts to enable a child in a floor sitter or an adult in a wheelchair or stander to use the table. Features include a powder-coated steel frame, four-dual locking casters, push-button h
Convert-Able Table (Art Easel)
The Convert-Able Table (Art Easel) is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or with severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the paper will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. Horizontal gui
Deluxe Folding Personal Worktable
The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures
Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)
The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to
Flextable (Model A)
The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)
Flextable (Model B)
The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS
Flextable (Model C)
The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.
Folding Wheelchair Table
The Folding Wheelchair Table is a height-adjustable tilt top work table designed for use by children and adults who use wheelchairs. Features include a chrome-plated steel frame and side braces to ensure stability and a laminated, scratch-resistant woodgrain surface. The table can also accommodate tilt tables and it folds for storage and transport. DIMENSIONS: The height adjusts from 29 to 44 inches. The top is 30 x 40 inches, and the top tilts up to a 45 degree angle.
Heavy Duty Mobile Adjustable Height Wheelchair Table (Model 375)
This adjustable height work table can accommodate both children and adults. Its features include a chrome plated steel frame, ball bearings, and 3-inch locking rubber swivel casters. It is equipped with side braces to assure stability. The table top is a wood grain laminated, scratch resistant surface. It can be used with wheelchairs and tilt tables. DIMENSIONS: Height adjusts from 26 to 34 inches, the top is 30 x 36 inches with a 5 1/2 x 20 inch cut out, the top tilts to a 45 degree maximum.
Jobri Mobile Desk Caddy (Model F7300-Xx)
The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31
Lil' Desk Mate
The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the
Midland Child / Adult Combination Work Table (Models 7082)
The Midland Child/Adult Combination Work Table is a height adjustable tilt top work table with a cut out designed for use by children and adults who use wheelchairs. The table features a rimmed maple tabletop that tilts to any angle up to 45 degrees and a tubular steel frame on a U-base with locking swivel casters. Model PC 7082 ($1349) is crank-adjustable. DIMENSIONS: The table surface is 26.5 inches square and the height adjusts from 24.5 to 31 inches. The casters are 3 inches in diameter.
Midland Combination Work Table (Model 7081)
The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches.
Midland Wheelchair Work Table (Model 7080)
The Midland Wheelchair Work Table, model 7080, is an adjustable height tilt top table designed for use by individuals with mobility disabilities. This table has a chrome plated steel frame and swivel casters fitted with step-on brakes. The table fits over any wheelchair. The Formica tray has a raised rim, and tilts to a 45-degree angle. Table is latex free. DIMENSIONS (HxLxW): 28 to 39 x 32 x 36 inches. Cutout is 22 x 6 inches. Base measures 34 inches in width and 26 inches in depth.
Over-Chair Table
CUSTOM ADAPTATION PURPOSE: To enable an individual with Parkinson's disease to engage in a variety of activities while seated in his recliner. The customized table has a large plywood base that fits under the chair and is held in place by the weight of the chair. The chair's castors slot into small holes in the base, holding both the chair and the table completely stable. A post with a spring-loaded carriage that moves up and down from a gym set was mounted to the base. The table support was br
Personal Work Table With Tilt Top (Model 76-31K)
The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.
Picture Frame Restoration Workstation
DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to restore picture frames without bending or lifting. The custom-designed workstation consists of a worktable that includes a separate revolving grid that provides an indexed tilting mechanism and 350-degree rotation. This provides the user full appropriate positioning of the frame without the need to bend over the table or lift. The table accommodates a standing worker and a height-adjust
Reflex ADA Drafting Table
The Reflex ADA Drafting Table is an adapted desk designed for wheelchair users and is intended for use at home, in a hospital, or at school. The table has a ½ circle radius cut out of the front edge of the desk with 7 ½ inch table surface on either side. The 30 inch x 40 inch top is constructed of scratch-resistant Melamine with raised black PVC edging to prevent pencils and other items from falling off. The base of the table has a 33 inch space between the side legs and 28 3/4 inch depth cleara
Rehabilitation Table
The Rehabilitation Table is a height-adjustable tilt-top work table designed for use by individuals who use wheelchairs. The base is equipped with a modesty panel and is constructed of 18 gauge steel. The table has a laminate top with a raised edge and a cutout for access. The tilt angle adjusts from 0 to 35 degrees. The table has four caster for mobility and two of the casters lock. DIMENSIONS (HxDxW): The top is 0.75 x 30 x 40 inches. Table height adjusts from 29 to 44 inches. COLOR: Grey top
Rifton Multidesk (Models E270 & E280)
The Rifton MultiDesk, models E270 and E280, is an accessible table designed for use by individuals who use wheelchairs. Available with a tilt or fixed flat top, these tables have curved cutouts for access and are height adjustable without tools. The tilt-top models have a table top that tilts upward with a double-latching mechanism in 5-degree increments, from 0 to 30 degrees. A book ledge keeps items positioned when top is tilted. OPTIONS: Three- or five-inch deep top-opening book boxes that at
Table-Mate Ii
The Table-Mate II is an accessible height-adjustable tilt top work table designed for use by individuals with mobility disabilities. This portable table adjusts in height and angle, adjusts for chair and body size, and folds for storage. This table holds up to 50 pounds and can serve as a student desk or workstation or be used for reading, hobbies, puzzles and games, and art activities. DIMENSIONS: The table top is 20.75 x 14.75 inches and the distance between the legs is 18.25 inches. The heigh
Theradapt Extended Easel
The Theradapt Extended Easel provides a working surface that facilitates the use of many seating systems, standers and mobility devices. The TherAdapt Extended Easel is designed with a 25 degree angle setting for the working surface; however, you can adjust the height from horizontal to a 60 degree angle for proper eye gaze and erect trunk and head positioning. Users have the ability to choose the correct leg size for their easel.
Vision
Vision is a height-adjustable table that has not cross braces underneath the surface. It is designed for individuals who use a wheelchair for mobility. The Vision is a mobile table that can be adjusted manually or electrically. The adjustable surface is available for dual or single users.